PLEASE NOTE: From 2 October 2018, Impreglon Australia’s services will be operated by DECO. Call 02 9603 1888 or email for more information.

Monthly Archives: April 2016


Case Study: Qantas A380 Ladders

Along with the delivery of their new fleet of Airbus A380s from France, Qantas Australia also received many pieces of maintenance and diagnostic equipment that are vital in the process of keeping their planes flying. Amongst this equipment, specially constructed platform ladders from were received, allowing safe access to the aircraft's jet engines as they are being serviced. Within less [...]

By |April 30th, 2016|Powdercoating|0 Comments

Case Study: Hong Kong Old Central Police Station

When the Hong Kong authorities decided to redevelop the Old Central Police Station Complex (CPS), they turned to Impreglon to solve a major finishing problem. The CPS project is a significant undertaking supported by the Hong Kong Jockey Club Charities Trust and is intended to transform a collection of historically significant buildings into a centre [...]

By |April 30th, 2016|Anodising, E-Coating|0 Comments

Case Study: Mercedes Benz A-class

Impreglon has set a significant milestone with its new process for mounting fittings on transverse beams in the Mercedes-Benz A-class and B-class series. Instead of screwing the fittings onto the transverse beam, they are now glued on. This makes processing of the transverse beams easier and better, and it reduces the fuel consumption of the [...]

By |April 30th, 2016|Uncategorized|0 Comments

Case Study: ACO Rotational Moulds

ACO in Australia offers an extensive portfolio of stormwater, building drainage systems, cable pit and ducting systems, access covers and other niche drainage products. As part of this range of products, they mould a variety of large plastic ‘service pit liners’ for various drainage utilities. These pits are rotationally moulded, and their large size was resulting [...]

By |April 30th, 2016|Teflon|0 Comments

Case Study: Automotive Engine Mounts

Harrington Industries has been manufacturing stamped metal products for nearly a century. Their metal pressing and steel stamping facility located in Padstow, Sydney, has produced parts for some of Australia's most prominent corporations, including Electrolux, Victa Lawnmowers, and many of Australia's automotive manufacturers. To fulfil a contract for one of these companies, Harringtons was looking to Electrophoretically Paint (or [...]

By |April 30th, 2016|E-Coating|0 Comments

Case Study: Ingal Civil Guide Posts

Ingal Civil Products is a leading manufacturer and supplier of safety barrier systems. They are part of a large network of companies specialising in engineered steel products and galvanizing services whilst employing over 8000 people in more than 20 countries. Ingal Civil Products manufacture the ‘Flexfence TL Wire Rope Safety Barrier’, as seen on most major [...]

By |April 30th, 2016|Powdercoating|0 Comments

Case Study: Pentair Valve Bodies

Pentair Valves & Controls is a global leader in designing and providing engineered flow management solutions to industries around the world. Their Customers that want to maintain safe, efficient, profitable and sustainable operations rely on Pentair’s engineered solutions. And when Pentair want the best coating for their engineering, they come to Impreglon Australia. As part of [...]

By |April 30th, 2016|Hard Anodising|0 Comments

Case Study: Qantas Food Trays

Supporting the international Aviation industries, Byron Aviation specialises in the design, manufacture, maintenance and restoration of aircraft furnishings, composite structures, ground support equipment and inflight equipment. Byron Aviation manufacture a range of inflight cabin services catering equipment for Qantas and other major Australian airlines. They have been a customer of Impreglon Australia for more that twenty [...]

By |April 30th, 2016|Anodising|0 Comments